Tag Heuer repair - Tag Heuer Aqua Racer Overhaul and re
This time watch is to introduce Yongdu damage is estimated to be caused in part due to manipulation.
watch that was a lot of problems.
The teeth of the presidential car damaged and, second axis of the wheel was blown by winds of the spring is broken, and the main condition.
After removing the hands, start.
Left Group on the watch parts of the newly transplanted parts of the right parts, and to the normal parts.
To take the photograph to compare that one by one detail.
First, the presidency of the component.
The main spring taeyeoptong just above the combined spring part that turns back when.
Yongdu, due to frequent the spring so by the damage and it is.
The wheel damage to the part of a black circle.
Damaged parts were found in the lower part you can't see it in the picture.
The left side of the picture above is [pivot] the center of the second wheel axis must be out like a circle.
Right the clock second wheel center axis of the situation is totally broken off.
The clock when first glance, it is unknown.
Our feeble answer to, its interior, how sophisticated and sensitive parts will feel the same.
Steadily over the weak, weak and water, and impact than I thought it stop you wearing that there will be no ongoing management also required.
The newly transplanted parts with washing and drying is complete, and to do it together again.
The main parts are on the plate one starts to gain a foothold.
Winds of the new main spring.Inside, 8200 d - 5, oil ring to work outside.
This time, hoping to work long and never fail..^^
A coat - escapement wheel epillam
Oil is stability, as part of engagement with folk pallet and work to maintain the place.
How many times been talked about the Rolex overhaul operation stop the lever.
A little different, but the figure of that operation is similar.
Yongdu hair spring to stop the behavior of the wheel balance you may root up a level 2 plays a role to stop time.
Main Bridge oil ring in the spring.
Similarly, coating doen epillam pallet escapement wheel and operate, as you can see from above is a fork.
I -- It seems you don't understand it is, the picture.
Left in the back of the jewel of the escapement wheel, and [> > > >] directions from the left fork pallet the ending.
From now on, the work should focus.
However, more than in other parts the parts to exchange a new clock, repair to be perfectly proper oil ring If you don't see any activity not.
I need oil in small parts.
A big role for even small parts.
Can you see the oil that stood in a circle?
The Jewel that was the oil ring end of this should cover it.
Like one more time, numerical values to be repeated and adjustment to do.
Overhaul, to show satisfactory levels through the posture chajojeong work on the final step.
Bind the hands first.
Located in the forward with setting at, 12 minute and hour hands together.
The reason is so positive in the hands that are setting 12 Yongdu, when manipulated by the minute hand moves around exactly the hour hand around the clock an hour to make.
The second hand to completion bond
Which now needs to be the rotor assembly, the rotor [jadongchu] many oil is a necessary part, too.
Bearing part d - 5 oil to the gas station.
As I said earlier, the rotor due to the user's movements and to serve as to generate the power source of the clock.
The rotation is there will be smooth operation.
D - 5 oil in a lot of points of friction can operate smoothly to ensure that role.
Place the current time, and the assembly to the case again later into the winder.
At least 24 hours over the final confirmation, and there is no more than looking at you when you get in touch with you will be completion of repair.
Repair to implement, and I hope I'll be done without a long period of time together.
